BSA is building a family around its Bantam 350 platform. For 2027, the 334cc roadster gets two siblings, the Bantam Scrambler 350 and the Bantam Bobber 350, and the Bobber also comes in an SP (Special Parts) version. BSA unveiled both at EICMA in Milan earlier this month, where these photos of the Bobber 350 and Bobber 350 SP were taken. Anupam Thareja, co-founder of Mahindra-owned BSA parent Classic Legends, says both new Bantams are aimed at bringing new riders to the brand. Pricing hasn’t been announced. BSA also hasn’t said whether the Bobber will come to the US.
- Peak horsepower is a near match for the standard Bantam 350, and torque is down. The liquid-cooled 334cc DOHC single makes a claimed 28 horsepower at 8000 rpm, 250 rpm above the Bantam 350’s peak. Torque is 19 lb-ft at 6000 rpm, about 2 lb-ft less than the roadster makes at the same engine speed. The transmission is a 6-speed, with chain final drive. Like every new BSA, the Bobber meets Euro 5+ emissions standards.
- The Bantam Bobber 350 is strictly a solo machine. The saddle sits 29.2 inches off the ground, more than 2 inches lower than the Bantam 350’s 31.5-inch seat. Add the low-slung profile and the bobbed rear fender, and it has the look of a factory custom.
- The standard Bobber 350 rides on cast wheels. The 18-inch front wears a 100/90-18 tire, and the 17-inch rear takes a 150/70-17. MRF handles the tires, with a Steel Brace SP-01 in the rear. Suspension is a traditional 41mm fork with a cover, and a gas-charged shock with 7-position spring-preload adjustment. Wheelbase is 59.1 inches. BSA shows the standard model in dark red and grey, and says more colors are coming.
- The SP version gets a gold inverted 41mm fork and 16-inch wire-spoke wheels. The 16-inch wheels wear a 130/90-16 Metzeler ME 888 Marathon Ultra front tire and a 150/80-16 Metzeler Cruisetec rear, putting much fatter rubber up front than the standard Bobber. It’s the same wheel-size formula Triumph uses on its 1200cc Bonneville Bobber, which shares the BSA’s 59.1-inch wheelbase. The SP also gets a color TFT display and a dark chrome finish. BSA lists the same wheelbase, seat height, and curb weight for both versions.
- Each end gets a single disc, with dual-channel ABS. The front disc measures 320mm, the rear 240mm, and both Bobbers get the same brakes.
- BSA puts curb weight at 417 pounds, 9 more than the Bantam 350, and the tank holds 3.5 gallons. The company’s three-year, unlimited-mileage warranty covers its Euro 5+ models. Prices have not been released for either Bobber.
- We will wait not so patiently for BSA to get its bikes to the United States. There’s talk that bureaucrats in customs have been holding up the Gold Star 650 from getting into the hands of American buyers. Once that is resolved, we can start leaning on BSA to bring the entire Bantam family to the United States.
2027 BSA Bantam Bobber 350 Specifications
ENGINE
- Type: Single-cylinder
- Displacement: 334cc
- Maximum power: 28 hp @ 8000 rpm
- Maximum torque: 19 lb-ft @ 6000 rpm
- Valvetrain: DOHC
- Compression ratio: 11:1
- Cooling: Liquid
- Transmission: 6-speed
- Final drive: Chain
CHASSIS
- Front suspension: Bobber 350: 41mm fork; Bobber 350 SP: Inverted 41mm fork
- Rear suspension: 7-position spring-preload adjustable gas-charged shock
- Wheels: Bobber 350: Cast; Bobber 350 SP: Wire-spoke
- Front tire: Bobber 350: 100/90-18, MRF; Bobber 350 SP: 130/90-16, Metzeler ME 888 Marathon Ultra
- Rear tire: Bobber 350: 150/70-17, MRF Steel Brace SP-01; Bobber 350 SP: 150/80-16, Metzeler Cruisetec
- Front brake: 320mm disc
- Rear brake: 240mm disc
- ABS: Dual-channel
DIMENSIONS and CAPACITIES
- Wheelbase: 59.1 inches
- Seat height: 29.2 inches
- Fuel capacity: 3.5 gallons
- Curb weight: 417 pounds










