2024 KTM 350 XC-F Factory Edition Buyer’s Guide [Specs]

0
2024 KTM 350 XC-F Factory Edition Buyer’s Guide [Specs]

The 2024 KTM 350 XC-F Factory Edition is a cross-country racer built on the standard 350 XC-F, with technical, protective, and cosmetic upgrades for riders lining up at cross-country races.

2024 KTM 350 XC-F Factory Edition studio front three-quarter view

The base 350 XC-F shares its chassis with the rest of KTM’s 2024 Cross Country lineup. A spring-type WP Xact closed-cartridge fork replaces the previous air fork, and the WP Xact shock has matching settings, with toolless damping adjustments at both ends. The DOHC 350cc single has an upshift-only quickshifter, traction control, launch control, and two maps selectable from the handlebar.

2024 KTM 350 XC-F Factory Edition FMF titanium muffler

The Factory Edition’s FMF Factory 4.1RCT muffler is titanium, with a carbon-fiber end cap. It cuts weight, and KTM claims a torque boost.

2024 KTM 350 XC-F Factory Edition orange-anodized front hub and Wave brake disc

Factory wheels use orange-anodized billet hubs and aluminum spoke nipples, laced to black-anodized D.I.D aluminum rims with Dunlop Geomax MX33 tires. Stainless steel Wave discs are bolted to the hubs; the solid rear disc helps prevent premature pad wear in mud. A KTM Powerparts guard protects the front disc and Brembo caliper, and a lightweight orange rear sprocket trims weight.

2024 KTM 350 XC-F Factory Edition factory triple clamps and graphics

A larger skid plate and a Hinson outer clutch cover protect the engine. CNC-milled aluminum Factory triple clamps hold the fork legs, intended to sharpen handling and front-end action, and the Factory Start Device offers two preload settings for starts.

2024 KTM 350 XC-F Factory Edition Selle Dalla Valle ribbed seat

A Selle Dalla Valle Factory Racing Seat has a ribbed cover to keep the rider in place under hard acceleration and braking, and Factory graphics finish the look.

The 350 XC-F Factory Edition is for cross-country racers who want factory-level parts installed before the bike leaves the dealer.

2024 KTM 350 XC-F Factory Edition Specifications

ENGINE

  • Type: Single-cylinder four-stroke
  • Displacement: 350cc
  • Bore x stroke: 88 x 57.5mm
  • Compression ratio: 14.6:1
  • Valvetrain: DOHC; 4 valves
  • Starting: Electric
  • Lubrication: Pressure lubrication w/ 2 pumps
  • Fueling: Keihin EFI w/ 44mm throttle body
  • Transmission: 6-speed
  • Clutch: Diaphragm spring wet multi-disc w/ Brembo hydraulics
  • Final drive: Chain

CHASSIS

  • Frame: Central double-cradle chromoly steel
  • Subframe: Aluminum-reinforced polyamide
  • Handlebar: Neken tapered aluminum
  • Front suspension: Fully adjustable WP Xact inverted 48mm fork; 12.2 inches
  • Rear suspension: Linkage-assisted fully adjustable WP Xact shock; 11.8 inches
  • Wheels: D.I.D DirtStar
  • Front wheel: 21 x 1.60
  • Rear wheel: 18 x 2.15
  • Front tire: 80/100 x 21; Dunlop Geomax MX33
  • Rear tire: 110/100 x 18; Dunlop Geomax AT81
  • Front brake: 260mm disc w/ Brembo caliper
  • Rear brake: 220mm disc w/ Brembo caliper

    DIMENSIONS and CAPACITIES

  • Wheelbase: 58.5 inches
  • Rake: 26.1 degrees
  • Triple clamp offset: 22mm
  • Seat height: 37.5 inches
  • Ground clearance: 13.5 inches
  • Fuel capacity: 2.24 gallons
  • Wet weight: 241 pounds

No posts to display