Cycra Racing: Powerflow KTM Shrouds

Aftermarket Shrouds for KTM Motorcycles

Cycra Racing's new patented Powerflow Shrouds for KTM motorcycles are now available for the everyday rider and weekend warrior. Specifically developed with Grant Langston for the Langston KTM Racing Team, the shrouds are race-tested for winning results.

Cycra's Powerflow Shrouds were redesigned to be half inch narrower than stock with an extended edge that helps reduce boot snagging. The front edge is also thicker and rounder than stock to help reduce stress and cracking. But the secret lays in Powerflow Scoops that forces air around the radiators instead of through them.

The Powerflow Scoops shrink from 5 inches tall to 1-1/2 inches tall at its exit point. This accelerates the air as it goes through the narrowing venturi of the plastic scoop. Because the air going by the radiator is part of the air stream entering the radiator vanes the total airflow moves faster, thus pumping heat from under the fuel tank and cylinder head reducing power-robbing temperatures.

Grant Langston says: "I can not afford to lose races due to overheating and broken components. What Cycra has done with these new KTM Powerflow Shrouds, as with all their product, is to push the operational race envelope giving my KTM team the confidence to ride to the edge."

Langston started using the Cycra Powerflow Shrouds while riding for Yamaha after continually over heating his YZ450F. Cycra developed the Yamaha Powerflow Shroud and effectively reduced the temperatures and fuel over heating problems, resulting in Langston winning an Outdoor Championship for Yamaha and Cycra. He went on to win the 2007 AMA 450 Outdoor MX National Championship the following year.

Cycra Powerflow Shrouds for KTM Motorcycles:

  • Cycra High Performance Plastic
  • Injection Molded for High Quality Fit and Finish
  • Ultra lightweight and slimmer than stock
  • Patented Powerflow By-Pass Scoops help reduce engine, fuel system and radiators temperatures
  • Extended top edge to reduce tree and boot snagging
  • Reinforced Mounts for Start Devices
  • Works with most stock graphics kits for the KTM 2011-2012 shrouds. (Some trimming maybe need at front edge.)
  • Available in factory KTM Orange, Black, White
  • Factory Race Team Designed and Tested
  • Made in the USA
  • MSRP $89.95

Cycra Racing is the choice of factory racers such as Grant Langston, James Stewart, Kevin Windham, Davi Millsaps, and Justin Bracia, and more

Cycra Racing develops and builds its products all under the same roof in Hebron, Ohio. From the CNC machine shop, state of the art paint facility, plastic thermoforming, and injection molding,

Cycra offers the toughest, coolest looking, most cutting edge products in the industry. Check out the wide variety of products at Cycra also provides free online technical support.


Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.