All New Motocrosser
Yamaha has released the following information on its new 2010 250F motocrosser.
>> The all-new, Bilateral Beam frame is specific to the 250 and is more compact than the previous generation chassis. This places the rider closer to the front wheel, which delivers superb rigidity balance for unmatched lightweight handling and cornering. This nimbleness lets the rider get on the gas sooner out of corners and cross the finish line with less fatigue – even on long motos.
>> The optimized engine delivers a new level of power in low-to-midrange, with a great torquey feel, exactly where riders want it. That is due to the new straight intake boot that enhances breathing, new carburetor that provides excellent throttle response and fuel atomization, and redesigned valve train components that reduce inertial mass and boost low end torque. Exhaust is also enhanced with a new D-shaped exhaust port and newly designed exhaust system. Ongoing refinement to the suspension and engine produces an amazingly balanced, light-handling machine with performance that’s accessible to all levels of riders.
>> All new styling emphasizes the bike’s light weight and nimble handling character. The sharp, horizontal lines set the bike apart, with a clean, aggressive look.
>> KYB suspension has been recalibrated front and rear and is tuned to work with the new Bilateral Beam frame for unmatched handling. The clutch lever has a lighter pull feel even though the clutch has stronger engagement. The new clutch also has a wider engagement range that will give riders an advantage off the line. . . shift after shift, moto after moto.
>> There’s no disputing the YZ250F’s unmatched four-stroke prowess – it was the 1st four-stroke 250 motocross bike on the market, the 1st to win an international race, the 1st to win an AMA Supercross and the 1st to take an AMA U.S. Supercross Championship title, as well as the first to win an AMA National race.Chassis and Suspension
>> The Bilateral Beam frame is crafted from a carefully chosen combination of forged and extruded aluminum pieces – 20 in all – all welded together to provide unmatched rigidity balance.
>> The KYB speed-sensitive front fork delivers exceptional damping feel, responsiveness, and bump absorption characteristics. Damping settings are revised, the piston rods have a new surface treatment, and the oil seal is a new design.
>> The 4-way-adjustable KYB rear shock has been redesigned to make the most of the Bilateral Beam frame design. It’s lower in the frame for excellent mass centralization, and has new damping characteristics.
>> The new tank, seat, and rear fender are flat and the relationship between handlebars, pegs, and seat result in a natural, more forward riding position that facilitates rider movement. The fuel tank has been moved toward the center of the bike for mass centralization. The ProTaper bars are four-way adjustable, and handlebar mounts and footpegs are 5mm higher to optimize rider position on the new chassis.
>> The valve spring retainers are now lightweight aluminum instead of steel, and valve spring pressure is lighter for reduced valve opening force. This contributes to superior low-to-mid range torque characteristics due to less power-robbing friction. There’s also a new, higher lift cam profile, while valve stem ends are chromium-nitride coated for exceptional reliability and reduced maintenance.
>> The exhaust port shape has a “D” shape instead of round. This increases velocity through the port for excellent throttle response, while enhancing the power feeling of the engine.
>> The newly designed radiator is lower and further back and the oil tank is more compact and repositioned to achieve greater mass centralization.
>> The carburetor bore has a new venturi shape, plus there’s recalibrated jetting and a new accelerator pump. This translates to impressive response when the rider snaps open the throttle, and contributes to superb torquey low-to-midrange power characteristics.
>> The intake boot offers a straight, smooth tract for excellent engine breathing and more power. The airbox is reshaped to tuck neatly into the Bilateral Beam frame.
>> The exhaust pipe has been carefully tuned to optimize engine power, with a muffler that’s 50mm longer and with a narrower core – a design that lets the YZ250F comfortably meet the latest noise standards without sacrificing power.
>> The CDI unit has revised ignition mapping to match new engine intake and exhaust specs.
>> Engineers were able to increase the clutch spring load for stronger engagement, yet, thanks to a recalibrated clutch actuation arm cam ratio, lever pull is actually lighter than before.
>> Third and fourth gear ratios are slightly taller, and third, fourth, and fifth gears are stronger than ever with new drive dog shapes for positive engagement. That gives riders a strong gearbox that’s been carefully matched to engine power characteristics.
FEATURES & BENEFITS SPECIFICATIONS
Engine…250cc liquid-cooled DOHC 4-stroke; 5 titanium valves
Bore x stroke…77.0 x 53.6mm
Carburetion…Keihin FCR MX37
multiplate wet clutch
Front suspension…Speed-Sensitive System inverted fork;
fully adjustable, 11.8-in travel
Rear suspension…Fully adjustable single shock;
Front brake…Hydraulic single disc brake, 250mm
Rear brake… Hydraulic single disc brake, 245mm
L x W x H…85 x 32.5 x 51.3 in
Seat height…38.9 in
Ground clearance…14.8 in
Fuel capacity…1.7 gal
Wet weight…224.8 lb
Colors…Team Yamaha Blue/White;
Note: Wet weight includes the vehicle with all standard equipment and all fluids, including oil, coolant (as applicable) and a full tank of fuel.