The 2024 KTM 450 SX-F Factory Edition is as close as a showroom motocrosser gets to a Red Bull KTM factory race bike. It is the basis for the machines Chase Sexton and Aaron Plessinger raced in 2024, and it differs from the standard 450 SX-F in several ways.
The chassis comes first. The chromoly steel frame has new flex characteristics and is anodized orange. The WP Xact fork and shock get settings to match, and orange-anodized factory triple clamps allow a 20mm or 22mm offset to personalize the handling.
The KTM Connectivity Unit Offroad (CUO) is standard. It tunes the engine, logs data, and helps with suspension setup. Handlebar switchgear selects between two power maps and controls traction control, launch control, and the quickshifter, which allows clutchless full-throttle upshifts from 2nd to 5th gear. A mechanical holeshot device works with launch control.
The 449cc SOHC single gets a Hinson clutch cover and a titanium Akrapovič slip-on muffler intended to add low-rpm power. Updated radiator shrouds improve cooling and the rider’s interface with the plastic.
Factory parts are everywhere. There is a Selle Dalla Valle seat, a Neken tapered aluminum handlebar with gray ODI lock-on grips, and KTM Factory wheels with orange-anodized CNC-machined hubs laced to D.I.D DirtStar rims and shod with Dunlop Geomax MX34 tires. An orange aluminum rear sprocket, a carbon composite front disc guard, and Brembo hydraulics round it out.
Red Bull KTM Factory Racing graphics make it unmistakable. KTM also offers a 250 SX-F Factory Edition with the same upgrades for $11,349.
2024 KTM 450 SX-F Factory Edition Specifications
ENGINE
- Type: Single-cylinder 2-stroke
- Displacement: 449cc
- Bore x stroke: 95 x 63.4mm
- Valvetrain: SOHC; 4 valves
- Starter: Electric
- Fueling: Keihin EFI w/ 44mm throttle body
- Muffler: Akrapovič titanium slip-on
- Lubrication: Pressure w/ 2 oil pumps
- Transmission: 5-speed
- Clutch: Wet multi-disc DDS clutch w/ Brembo hydraulics
- Final drive: 520 Gold chain
CHASSIS
- Frame: Central double-cradle chromoly steel w/ aluminum/polyamide subframe
- Handlebar: Tapered aluminum Neken
- Front suspension; travel: Fully adjustable WP Xact inverted 48mm fork; 12.2 inches
- Rear suspension: Linkage-assisted fully adjustable WP Xact shock; 11.8 inches
- Wheels: D.I.D DirtStar
- Front wheel: 21 x 1.60
- Rear wheel: 19 x 2.15
- Tires: Dunlop Geomax MX34
- Front tire: 80/100 x 21
- Rear tire: 120/80 x 19
- Front brake: 260mm disc w/ Brembo hydraulics
- Rear brake: 220mm disc w/ Brembo hydraulics
DIMENSIONS and CAPACITIES
- Wheelbase: 58.7 inches
- Rake: 26.1 degrees
- Triple clamp offset: 22mm
- Seat height: 37.7 inches
- Ground clearance: 13.5 inches
- Fuel capacity: 1.9 gallons
- Curb weight: 240 pounds





![2024 KTM 300 XC-W HardEnduro Buyer’s Guide [Specs, Price] 2024 KTM 300 XC-W HardEnduro First Look: Hard Enduro Motorcycle](https://ultimatemotorcycling.com/wp-content/uploads/2023/06/2024-ktm-300-xc-w-hardenduro-first-look-15-140x93.jpg)
![2024 KTM 450 XCF-W Buyer’s Guide [Specs, Price] 2024-ktm-450-xcf-w-first-look-9](https://ultimatemotorcycling.com/wp-content/uploads/2023/05/2024-ktm-450-xcf-w-first-look-9-140x93.webp)
![2024 KTM 450, 350, and 250 SX-F Buyer’s Guide [Specs, Price] 2024 KTM SX-F Lineup First Look: 450 MSRP](https://ultimatemotorcycling.com/wp-content/uploads/2023/05/2024-ktm-450-sx-f-first-look-5-140x93.webp)
![2024 KTM 300, 250, and 150 XC-W Buyer’s Guide [Specs, Price] 2024-ktm-300-xc-w-first-look-6](https://ultimatemotorcycling.com/wp-content/uploads/2023/05/2024-ktm-300-xc-w-first-look-6-140x93.webp)

![2024 Husqvarna TE 300 Pro Buyer’s Guide [Specs] 2024 Husqvarna TE 300 Pro First Look: For Sale](https://ultimatemotorcycling.com/wp-content/uploads/2023/09/2024-husqvarna-te-300-pro-first-look-enduro-motorcycle-7-140x79.webp)

