2013 Brno MotoGP | Bridgestone Tire Debrief

Yamaha Factory Racing's Jorge Lorenzo at Brno

Yamaha Factory Racing's Jorge Lorenzo at Brno
Yamaha Factory Racing’s Jorge Lorenzo at Brno
2013 Czech Republic Bridgestone Tire Analysis

Bridgestone released its usual tire debrief in Q&A format with Shinji Aoki of the tire manufacturer’s development department.

Aoki discussed some in-depth tire analysis from the Czech Republic Grand Prix at Brno, a sweeping circuit that places much stress on the Bridgestone rubber.

Winning Brno MotoGP was Repsol Honda’s Marc Marquez. This was the rookie’s fifth win of 2013, and is fourth straight victory. Marquez worked his way from third to first, eventually finishing ahead of teammate Dani Pedrosa and the reiging MotoGP Champion, Yamaha Factory Racing’s Jorge Lorenzo.

With his win, Marquez now has a 26-point lead over Pedrosa after 11 of 18 rounds, and 44 over Lorenzo.

Bridgestone reports that conditions at Brno on race day were cool, with a peak track temperature of 73 degrees F recorded during the race – a massive thirty degrees cooler than was recorded during the previous race at Indianapolis. The cool temperatures resulted in all riders selecting softer rear slick options for the race, while all but three of the twenty-five riders selecting the hard compound front slick tire.

Following is a Q&A with Shinji Aoki, Manager, Bridgestone Motorsport Tire Development Department:

Q. Track temperatures on race day were ten degrees cooler than in Free Practice 4 and Qualifying. Did this have any effect on tire performance?

Shinja Aoki says: “The lower track temperatures on Sunday didn’t have any great effect on tire performance; rather it influenced tire choice, especially for the rear tyre. The warmest temperatures we experienced were on Friday afternoon when some riders tried the hard compound rear slick, and the rider feedback and lap times of this option were quite good so we assumed this would be an attractive race option.

“However, track temperatures for the race were around fifteen degrees cooler than Friday which put the hard compound rear tire out of its working range. The cooler temperatures were no problem for the softer rear slick options as a new race lap record was set and the overall race time was the quickest ever recorded at the Brno circuit.”

Q. The cooler weather prevented any riders selecting harder rear slick options for the race, but the harder front slick was by far the most popular choice for the race. Can you explain why this front option was chosen in what were quite cool temperatures?

Shinja Aoki says: “Brno features many downhill braking zones and sweeping corners which demand a lot of stability from the front-end of the motorcycle and the harder front slick does offer more stability than the softer option.

“The warm-up performance and edge grip of the soft compound front tyre is a bit better than the hard option, but most riders felt they could make better and more consistent lap times using the hard front slick.

“The soft compound front slick was mainly used in morning sessions when riders were assessing track conditions, but over a race distance most riders felt they hard front slick would yield the better performance, hence it being so popular on race day.”

Q. Bridgestone planned on bringing a new hard compound rear tire to Brno, but changed the allocation before the race to include the existing hard compound rear slick. Why did this change in allocation occur?

Shinja Aoki says: “Our decision to introduce the new hard compound rear tire at Brno was based on the positive feedback we had from riders in tests earlier this year. This new compound worked quite well at circuits like Montmeló in high temperatures, but following a recent Yamaha test at Brno, the new hard compound didn’t seem to offer an advantage over the softer specification even in high temperatures at the Brno circuit.

“As a result, we consulted with the teams and it was agreed that we would supply a different hard option rear tire using the soft compound on the left shoulder and the current hard compound on the right shoulder. I believe this was the right decision as when track temperatures were higher at Brno during the race weekend this current hard tire was working well. The new hard compound will form part of our future tire allocation, however we will test it further to find out which circuits it is best suited to before deciding where we will supply this option.”

Bridgestone slick compounds available: Front – Soft & Hard; Rear – Soft, Medium & Hard (Asymmetric)

Bridgestone wet tire compounds available: Soft (Main), Hard (Alternative)