2012 Husqvarna Dual Sport
When something is already on top in the dual-sport motorcycling sector, why change much? This was exactly what Husqvarna was thinking when designing the 2012 TE449. For 2012, Husqvarna didn’t need to make many modifications to the power of the TE449, considering the motor was already a top performer in the world of dual-sport motorcycles.
But what Husky did do was improve on the balance and aesthetics of the 2012 TE449. As for aesthetics, the 2012 Husqvarna now features a black chassis with anodized silver rims and new graphics that “emphasize the flow of the lines that express functionality, lightweight and style.” The 2012 Husqvarna TE449′s graphics are also molded onto the panels, rather than the old days of adhesive ones that would eventually peel.
Following are a list of modifications to the 2012 Husqvarna TE449′s chassis and motor from Husky.
2012 Husqvarna TE449 Chassis:
The new version uses more 25CrMo4 chrome-moly steel to reinforce the steering head, the seat rail and engine mounts. The rear section – now a single piece rear fender – is stronger and more streamlined and the entire electrical system has been simplified and lightened.
The styling and layout have been completely redesigned; it has better balance, with new suspension settings and the Kayaba rear shock is shorter by 4 mm, further reducing seat height.
The top of the range rear suspension uses Kayaba components (adjustable for rebound and compression) and an upside down linkage, combining the advantages of progressive linkage with a sheltered location. The front suspension (48 mm diameter forks) has been improved with more progressive damping. The rear shock is better shielded for additional protection.
These modifications are the result of the collaboration between the Husqvarna R&D team and the official racing team, further streamlining the frame, designed to concentrate weight on the bike’s centre-of-gravity and minimize chain-torque. The steel tubing perimeter frame was designed for the CTS – Coaxial Traction System – which on the TE449 reduces to a minimum the influence of the final transmission on dynamic handling and steering. With the gearbox output shaft coaxially aligned with the swingarm pivot, the torque generated by the powerful 450cc engine now has almost no influence on the handling, and above all allows the engine to be placed as far to the rear as possible.
This optimises the wheelbase and enables the forward slant of the cylinder head, which lowers the center of gravity and allows straighter inlet tracts for the engine.
The braking system is the trusted Brembo. The front braking disc has a diameter of no less than 260 mm, with a twin piston floating caliper, while the 240 mm rear disc has a light and compact single piston floating caliper.
2012 Husqvarna TE449 Engine:
The single cylinder, four valve, twin cam titanium valve engine is a recent design and needed few modifications, just some minor changes to the power curve. To better access and exploit all the power of the TE449, the designers concentrated on the mapping of the Keihin injection, which controls the action of the twin flap 46mm throttle body.
Fine tuning included the balancing of the engine thermodynamics with the light steel Akrapovic exhaust, developed in collaboration with the prestigious Slovenian manufacturer. The efficiency of the cooling circuit was improved with a change to the radiator, introducing a new WP component.
Unchanged are the six gears and clutch with soft and progressive hydraulic action. Weight is saved by eliminating a kick starter, which has proved to be superfluous, given the efficient and reliable electric ignition with high-power battery.