2011 Suzuki GSX-R 600 | Preview

2011 GSX-R 600

The GSX-R 600 has continued to win races in many 600cc classes across AMA Pro Racing and World Supersport, and for 2011, Suzuki decided on full redesign of the motorcycle.

New for 2011, the GSXR 600 shares the same advances as its 2011 brother, the GSX-R 750: race-proven advanced engine technology, with broader power delivery, improved throttle response, lower emissions and about 10-percent better fuel mileage as measured by Suzuki engineers using the standardized Worldwide Motorcycle Test Cycle.

The new GSX-R600 features nimble handling and a compact size; the new Suzuki also is 9 kilograms lighter, with a curb mass of 412 lbs., giving it the class-leading power-to-weight ratio for production 600 four-cylinder Supersports.

Efficiency By Design

Efficiency is an important motorcycle engineering consideration.

Combustion efficiency, for example, is a measure of how completely an engine burns its fuel. Better combustion efficiency can increase power and torque output across the rpm range; improve throttle response, acceleration and fuel mileage; and reduce emissions.

Mechanical efficiency is a measure of how much of the power and torque produced by an engine actually reaches the rear wheel. Reducing mechanical losses by minimizing internal engine friction, reducing the weight of reciprocating internal parts and relieving crankcase pressure can increase mechanical efficiency, putting more of an engine’s output to use actually moving and accelerating the motorcycle and also improving fuel mileage and reducing emissions.

Performance efficiency is best expressed by the power-to-weight ratio, or, the comparison of a motorcycle’s output to a motorcycle’s weight. The more power and torque the engine makes and the less the motorcycle weighs, the better the power-to-weight ratio becomes. In turn, a better power-to-weight ratio can produce stronger acceleration, better fuel mileage and reduced emissions in many situations.

Suzuki engineers paid special attention to making the new GSX-R600 as efficient as possible in every way.

A Lighter, More Compact Chassis

The GSX-R600 model both features completely new chassis designs, each based on a more compact, lighter twin-spar aluminum frame with a 15 mm shorter wheelbase. The GSX-R600s wheelbase now measures 1385 mm.

Rotating each model’s engine rearward by 3 degrees around the countershaft sprocket made it possible for the engineers to reduce the distance from the front axle to the swingarm pivot while maintaining the race-proven steering geometry and without losing the needed clearance between the front wheel and the radiator at full wheel travel.

For both models, the shorter wheelbase better centers the combined machine/rider mass between the wheels, improving racetrack cornering and also shortening the reach between the seat and the handlebars.

The shorter reach and slightly wider handlebar angle make it easier for the rider to reposition their weight while on the racetrack and also improve comfort on longer highway rides.

Each model’s main frame is built using five welded-together castings. But changes in the size and shape of the main spar castings and the relocation of the connecting welds contributed to a 1350 grams significant reduction in frame weight for each model and also allowed the engineers to adjust torsional rigidity and enhance racetrack cornering. Each frame is also narrower at the seat, making it more convenient for the rider to reposition their weight for cornering on the racetrack.

Each model’s aluminum swingarm is also 900 grams lighter, thanks to a simplified design using fewer welded-together, cast parts.

State Of The Art Engine Design

The GSX-R600 shares the compact and powerful four-cylinder engine design of the GSX-R 750 that is perhaps best described as a real-world demonstration of advanced high-performance motorcycle technology.

The engine is liquid-cooled with Suzuki Ram-Air Direct (SRAD) induction and a digital engine management system. Double Overhead Camshafts (DOHC) are driven by a link-plate chain off a forged crankshaft and open four titanium valves per cylinder through bucket tappets, with shim-under-bucket lash adjustment.

The valves are set at a narrow angle, 22.0 degrees for the GSX-R600-allowing a very compact Twin Swirl Combustion Chamber (TSCC)-with the GSX-R600’s intake valves set at 10.0 degrees from the cylinder centerline. The exhaust valves are set 12.0 degrees from the cylinder centerline.

Each model’s engine is oversquare, which means that it has a larger bore and a shorter stroke, producing a race-proven bore/stroke ratio which contributes to better efficiency and allows higher rpm. High-compression, forged aluminum three-ring slipper pistons feature cutaway sides and ride on short wrist pins carried by shot-peened chrome molybdenum steel connecting rods.

The rectangular upper compression ring and the oil control ring on each piston feature a chrome-nitride coating applied in a vacuum using a Physical Vapor Deposition (PVD) system.

The chrome-nitride coating is harder and smoother than conventional chrome plating, reducing friction and improving cylinder sealing; the rectangular upper compression ring is pushed out against the cylinder wall by combustion pressure, reducing blow-by and further improving cylinder sealing.

Each bore in the integrated aluminum-alloy cylinder-block/upper-crankcase casting is plated with Suzuki’s own race-proven nickel-phosphorus-silicon-carbide coating, which reduces friction and improves heat transfer, durability and ring seal and is known as Suzuki Composite Electrochemical Material (SCEM).

Pentagonal cutouts in the sides of each cylinder bore are larger in terms of area than conventional round ventilation holes, allowing air trapped underneath each descending piston to more quickly escape to adjacent cylinders where the pistons are rising.

The shape of the ventilation holes-wider at the top, narrower at the bottom-matches the actual flow of the trapped air, with more flow at the top and less at the bottom, and reduces pumping losses due to internal crankcase air-pressure resistance to downward piston movement. The larger ventilation holes also reduce overall crankcase weight.

The crankcases carry a six-speed close-ratio transmission with vertically staggered shafts, to reduce overall engine length, and a back-torque-limiting clutch.

The GSX-R600’s revised close-ratio six-speed transmission features a taller first-gear ratio and shorter ratios for 2nd, 3rd, 4th and 6th gear, making it easier for a racer to get a good start and also improving straight-line acceleration and drive out of corners. The overall combined weight of the transmission gearsets is reduced.

The race-proven ramp-and-cam design of the back-torque-limiting clutch reduces pressure on the plates during deceleration, producing smoother downshifting and corner entry and allowing the track rider to concentrate on braking and cornering.

The four-into-one stainless-steel exhaust system features four individual head pipes and a single collector. The mid-pipe located between the collector and the under-engine exhaust chamber carries a Suzuki Exhaust Tuning (SET) servo-controlled butterfly valve to match exhaust system back-pressure to engine rpm, throttle position and gear position, maximizing torque and improving throttle response, especially in the low-to-mid rpm range.

The exhaust chamber leads to stainless-steel S-bend pipe and a titanium muffler shaped and positioned to enhance cornering clearance and improve aerodynamics. A reduction in pipe wall thickness and a smaller, more efficient exhaust chamber and muffler combine to make the GSX-R600 system 1700 grams lighter.

A slightly larger-diameter radiator fan mounted on the efficient, trapezoidal, curved radiator turns on and off based on coolant temperature and improves cooling performance.

The new GSX-R600 uses lighter, more durable forged pistons designed with the same Finite Element Method (FEM) and fatigue analysis technology used to develop MotoGP racing engines. Shorter and narrower skirts, narrower wrist pin bosses and shorter wrist pins help make each piston assembly 78 grams lighter.

The lighter piston assembly translates into less reciprocating weight, reducing mechanical losses while improving throttle response, acceleration and engine output reaching the rear wheel.

The GSX-R600’s titanium intake valves measure 27.2 mm in diameter, while the titanium exhaust valves measure 22.0 mm in diameter. New camshaft profiles produce a more aggressive valve-lift curve to improve throttle response, mid-rpm torque and peak engine output while also preventing valve spring surge at high rpm.

The cam profiles were designed using advanced technology developed by Suzuki engineers working on ultra-high-revving MotoGP racing engines. The GSX-R600 is the first production Suzuki motorcycle to benefit from this proven MotoGP racing technology.

On the racetrack, that translates to better drives out of corners and higher top speeds. On the street, it means that the GSX-R600 doesn’t have to be revved as much to accelerate briskly away from a stop.

Advanced Digital Engine Management, Fuel Injection and Emissions Control

Both new GSX-Rs feature a repositioned engine management computer (also known as the Engine Control Module, or ECM) to allow the wiring harness to be simplified and made lighter. The ECM operates a state-of-the-art Suzuki Dual Throttle Valve (SDTV) closed-loop fuel injection system, an advanced ignition system and several emission control systems, producing better throttle response, smoother power delivery, improved mileage and reduced emissions.

At the heart of the SDTV system are two linked, double-barrel downdraft throttle bodies, each cylinder getting its own tapered barrel carrying two butterfly valves and two compact fuel injectors.

The primary butterfly valve in each throttle body is linked directly by cable (which provides a positive, instantaneous connection between the rider and the machine) to the throttle grip operated by the rider. The secondary valve is controlled by the ECM, which monitors engine rpm, primary butterfly valve position (or how much throttle the rider has selected) and gear position, then opens or closes the secondary butterfly valve incrementally to maintain the ideal intake air velocity for improved cylinder charging and more efficient and complete combustion. The result is more linear throttle response, increased torque and reduced emissions.

The latest fine-spray injectors each have 8 small holes for improved fuel atomization, which contributes to more complete combustion. The primary injector for each cylinder operates under all conditions, and the secondary injector adds more fuel during high-rpm, high-load operation.

The primary injector for each cylinder has been repositioned at a shallower, 35-degree angle from the throttle-body centerline, spraying atomized fuel below the primary butterfly valve and directly down the intake port, improving throttle response. Each cylinder’s secondary injector is mounted at a 15-degree angle and is aimed to bounce sprayed fuel off the secondary throttle valve, improving atomization and combustion efficiency while also contributing to more linear throttle response.

The amount of fuel delivered by the injectors is determined by the ECM, and is controlled by injector on-time. The longer the injector is turned on and is spraying fuel, the greater the volume of fuel delivered to the cylinder.

Primary injector on-time is calculated based on engine rpm, intake pressure (vacuum), throttle position and readings from a sensor built into the exhaust system; the sensor monitors exhaust gas composition and allows the ECM to adjust fuel delivery for more complete combustion, reducing hydrocarbon (HC), carbon monoxide (CO) and nitrogen oxide (NOx) emissions. Secondary injector on-time is calculated based on throttle position and engine rpm.

A new, technologically-advanced, transistorized ignition control circuit developed in MotoGP racing and built into the ECM offers finer calibration and maintains more precise and stable spark timing, across the range of engine temperature.

The system uses an individual ignition coil built into each spark plug cap and fires 10 mm NGK spark plugs. Each plug has a fine, iridium-alloy electrode that produces a hotter spark (resulting in more complete combustion and improved throttle response), and delivers about double the service life of a conventional spark plug electrode.

An automatic Idle Speed Control (ISC) system is controlled by the ECM, reading coolant temperature and regulating the amount of air fed into the throttle body idle circuits when the engine is started in cold conditions. The ISC system improves starting, reduces cold-start emissions and stabilizes engine idle under varying conditions.

Suzuki’s proven Pulsed-AIR (PAIR) system is controlled by the ECM and injects clean, fresh air from the air box into the cylinder head exhaust ports, reacting with unburned HC and reducing CO emissions. The amount of clean air injected into the exhaust ports is calculated based on throttle position and engine rpm.

A catalyzer, or catalytic converter, is built into the exhaust chamber mounted underneath the engine, to further reduce HC, CO and NOx emissions. The effective engine management and emissions control systems make the new GSX-R models cleaner-running.

S-DMS Rider-Selectable Mapping

The Suzuki Drive Mode Selector (S-DMS) system built into the ECM allows the rider to use a button mounted on the left handlebar switch module to select one of two engine control maps, regulating the fuel injection, secondary throttle valve and ignition systems. The two maps are designated A and B, with Map A delivering full power and acceleration and Map B producing more moderate acceleration.

The S-DMS system allows the rider to select a map to suit various riding conditions and personal preference on the road, for example choosing one map for highway cruising and the other map for tight country roads.

The two available maps were also developed using racing experience. Switching from one map to the other is instantaneous, making it possible for the rider to use one map on one part of a racetrack and then select the other map for another part of a racetrack, useful in case of localized rain in only a few corners.

The system also allows the rider to switch from Map A to Map B to suit conditions at the end of a long race when the rear tire is worn, to use Map B when scrubbing in a new rear tire, or to choose Map A for a high-speed racetrack and Map B for a tighter racetrack.

The Latest In Fully Adjustable Racing Suspension

For the first time, the Suzuki GSX-R600 come with the revolutionary, race-developed Showa Big Piston Front-fork (BPF) inverted front suspension system. Conventional inverted front forks use a cartridge assembly that fits inside the fork leg on each side and typically incorporates a 20 mm piston to control damping.

The advanced BPF design eliminates the separate internal cartridge assembly inserted into each fork leg and instead uses a single, 37.6 mm piston riding against the inside wall of the 41 mm inner fork tube.

The larger BPF piston and valving shims produce more effective, more accurate and more linear damping performance. The more controlled compression damping is especially noticeable during hard braking and at corner entry, delivering better feedback to the rider.

The BPF design also has minimized change in internal fork pressure throughout the stroke, improving response to small bumps and racetrack surface imperfections. And because the fork springs are relocated to the bottom of each fork leg where they are completely submerged in oil, foaming is reduced and damping performance remains more consistent. Because the piston is located above the fork springs, maintenance on the racetrack takes less time. Rebound and compression damping can also be externally adjusted, using convenient screws built into the fork caps

The BPF forks installed on the newest GSX-R600 are 860 grams lighter. The weight reduction is helped by the use of an external nut to secure the redesigned and lighter front axle, versus screwing the previously used front axle into a reinforced boss built into the fork leg.

The single Showa rear shock features externally adjustable rebound and compression damping, along with adjustable ride height. The threaded spring seats used to adjust preload are now made of anodized aluminum alloy instead of steel, reducing weight by 90 grams. The spring itself is also 200 grams lighter and a new shock linkage is 490 grams lighter.

Suspension response is also improved by a 550 grams reduction in unsprung weight, thanks to a 210 grams lighter front and 190 grams lighter rear cast aluminum wheel set and a 150 grams lighter rear sprocket drum assembly.

Unsprung weight-which is the weight of the components between the suspension (or springs) and the pavement-has a huge effect on each wheel’s ability to stay in contact with the racetrack surface. More contact means more traction, which is especially important when accelerating out of a corner on the racetrack, or when trail-braking into the apex of a corner on the racetrack.

An electronically controlled steering damper uses the ECM to monitor motorcycle speed and adjusts itself for lighter steering at slower speeds and in parking lots, and delivers more damping force at racetrack and highway speeds.

Fully Floating Front Disc Brakes, With Radial-mount Brembo Monoblock Calipers And Adjustable Controls

The GSX-R600 both come with 310 mm fully-floating front brake discs and new radial-mount, four-piston Brembo monoblock calipers. The 32 mm caliper pistons are staggered to promote even pad wear, the trailing pistons offset relative to the pad centerline.

The monoblock design of the new calipers makes them lighter, and their more rigid construction and increased piston area improve braking performance by providing the rider with more consistent power and better feel at the lever.

The front brake master cylinder uses a 17.46 mm radial-mount piston. The position of the front brake lever relative to the handlebar is 6-way adjustable, using a convenient adjustment wheel. Combined, the new front brake calipers and associated hardware are 405 grams lighter than the system used on previous models.

The single 220 mm rear disc works with a new, lighter Nissin single-piston caliper that is 325 grams lighter than the caliper used on previous models.

Adjustable footpegs can be moved into a choice of three different positions in a 14 mm horizontal and vertical range, contributing to rider comfort with a more relaxed seating position on the street or allowing more cornering clearance and a tighter tucked-in position on the racetrack. The rear brake pedal and master cylinder move together with the right footpeg assembly, and the shift lever linkage can be adjusted to accommodate changes in the left footpeg position.

Sophisticated Instrumentation, Featuring A Built-In Lap Timer

The new, more compact and lighter instrument cluster installed on the GSX-R600 now comes standard with a built-in lap timer/stopwatch and a programmable, sequential engine rpm indicator system. Both those new features can be useful at track days or during club-racing weekends.

The lap timer/stopwatch can be conveniently triggered using a button on the right handlebar switch module. The engine rpm indicator system’s four LEDs can be programmed to go off at four different rpm settings, with a choice of a solid or blinking light. LED brightness is also adjustable.

The centerpiece of the instrument cluster is an analog tachometer, with an adjacent LCD panel offering digital speedometer, odometer, dual trip meter, reserve trip meter, clock, coolant temperature/oil-pressure indicator, lap timer/stopwatch, S-DMS indicator and gear position indicator displays.

Other LED lights built into the cluster include neutral, high beam and turn signal, fuel level and FI indicators.

A rolling-code anti-theft immobilizer system is standard in selected markets, with an additional LED indicator light built into the instrument cluster.

Lighter, Simpler Bodywork With Improved Aerodynamics

The new Suzuki GSX-R600 feature exciting, aerodynamic styling and are even more streamlined and even more compact. The wind-tunnel development of the new model bodywork was done with a rider in place, because a motorcycle won’t move very far or very well without a rider. The work centered around giving both new GSX-Rs smaller, simpler and lighter bodywork, without losing any aerodynamic efficiency.

The bodywork is shorter front to rear to match the shorter wheelbase, but front overhang is also reduced by 55 mm and rear overhang is reduced by 35 mm. Seat height remains a relatively low 810 mm, and the top of the redesigned 17-liter fuel tank is lower, allowing the rider to tuck more completely.

The simplified bodywork uses fewer, thinner parts and panels with less overlap and fewer seams, requiring fewer fasteners and clips, while still passing strict Suzuki quality and durability tests. A new combination of smooth, curved lines with sharp edges and special attention to improving air flow along the side panels and lower cowling paid off by making it possible to significantly reduce bodywork surface area, saving even more weight.

Returning to a vertically-stacked dual headlight layout helped save additional weight without any performance penalty. And when the engineers were finished, each set of new GSX-R600 bodywork and associated external parts weighed an astonishing 35 percent less (a full 3,400 grams) than the equivalent parts used on previous models.

Lighter Weight Equals Better Performance

The importance of reducing curb mass by 9 kilograms for the new GSX-R600 cannot be overstated. The integrated design team of talented Suzuki engineers analyzed every engine, chassis and electrical part, component and assembly. Could it be made lighter, smaller, simpler while maintaining strength and durability?

It was detailed, painstaking work, and the result was better overall performance. On the racetrack, less overall weight contributes to harder acceleration, stronger braking, quicker handling. Which can make the difference in getting to the finish line sooner.

The Total Package

Designing a Supersport to Own The Racetrack isn’t simply a matter of bolting together parts. It takes a total package, every feature contributing to helping the rider turn faster laps around the racetrack.

Consider the scene at a racetrack near you: The rider swings a leg over the latest GSX-R and warms up the engine. Clicking the bike into gear, he heads out onto the course, quickly upshifting through the close-ratio six-speed transmission and accelerating hard toward turn one. At just the right point, the rider brakes hard and downshifts rapidly, the powerful, radial-mount Brembo front brake calipers scrubbing off speed while the GSX-R’s back-torque-limiting clutch and BPF front forks help keep the wheels in line as the rider turns into the corner.

Just past the apex, the rider rolls on the throttle and accelerates quickly over ripples in the track surface, the effective suspension and an electronically controlled steering damper helping the GSX-R smoothly follow the rider’s selected exit line.

It could be during a track day for fun and excitement, or during a national race weekend for purse money and championship points. It is the product of Suzuki’s integrated design approach, and the goal of every GSX-R: Own The Racetrack.

2011 Suzuki GSX-R 600 Price: $11,599

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.